Bbk-performance 1621 Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Bbk-performance 1621. BBK Performance 1621 User Manual [en] [es] [fr] Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 1
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
BBK 110-155, 190, & 255 lph
Fuel Pump Kits
Part # 1526, 1527, 1606, 1607, 1622
INS-012
For the ease of installation the fuel tank should be as empty as possible.
! CAUTION !
Keep all possible sources of ignition
away from vehicle at all times
Step 1
Place the rear of the vehicle on jackstands to obtain adequate clearance.
! CAUTION !
Use extreme caution under vehicle
Step 2
Start by removing the 5/16 bolt on the filler neck brace.
Step 3
Next place a floorjack with a block of wood on it under the tank to lower it.
Step 4
Unplug the wire harness on the back of the gas tank, then remove both 13mm bolts from the holding straps and
slowly lower the tank, removing the filler neck as you lower it. Also disconnect the fuel lines and the vacuum line
when the tank is low enough to gain access to them.
Step 5
Remove the gas tank completely from the vehicle, and using a spanner wrench or equivalent, remove the ring
holding the pump assembly from the tank.
Step 6
Remove the factory fuel pump from the tank by rotating and lifting the fuel pump/bracket assembly.
! CAUTION !
Do not knock filter loose during removal
Step 7
Install new filter and pump onto the factory bracket and reinstall making sure of filter orientation. (On Part #
1606, 1607 and 1622 pumps you must use additional hardware (hose, clamps, gaskets and wiring) when
attaching the pump to the bracket.)
Step 8
On Part # 1606 190 lph pumps – cut old connectors off of the factory wires and splice the new harness matching
red to red and black to balck with supplied connectors.
Step 9
Simply reverse previous steps 1-5 for reinstallation.
INSTALLATION INSTRUCTIONS
www.BBKPERFORMANCE.com
IMPORTANT—All appropriate safety equipment (e.i., gloves, tools) must be used during the installation of this product(s).
BBK Performance, Inc. accepts no responsibility for injuries resulting in the installation of any product(s).
Vista de pagina 0
1

Indice de contenidos

Pagina 1 - Fuel Pump Kits

BBK 110-155, 190, & 255 lphFuel Pump KitsPart # 1526, 1527, 1606, 1607, 1622INS-012For the ease of installation the fuel tank should be as empty a

Modelos relacionados 1625 | 1630 |

Comentarios a estos manuales

Sin comentarios